38
To de-activate the access code,
go back to advanced settings and
hold
MENU
and
G
pressed together
for a few seconds.
Enter your code. Wait 5 seconds.
Press
E
until «CP» and your code
are displayed.
ECO
CP
---
Hold
G
or
H
pressed until «no» is
displayed (between 000 and 999).
Wait 5 seconds.
To exit this function, hold
MENU
and
G
pressed together for a few
seconds. Access to the advanced
settings is no longer coded.
RETURNING TO THE FACTORY SETTING
Your device gives you the possibility of returning to the basic setting (recommended temperature, initial
programming).
Hold
MENU
and
G
pressed
simultaneously for a few seconds,
then press 3 times on
E
(C). To
activate the function, select OUI
with the setting buttons
G
or
H
(D).
“FS” “OFF” is displayed on the
screen.
Press on
G
or
H
(D), select “on”.
After 5 seconds of non-activity,
your setting is automatically
validated.
All the settings appear on the
screen.
After 1 minute of non-activity
or by pressing simultaneously
on
MENU
and
G
, the device is
put onto the Comfort mode
at 19°C. The ECO mode is at
15.5°C. The energy economy
functions and the programming
are de-activated.
SHEDDING
Our devices are compatible with the various shedding systems. However you cannot use shedding by cutting
off the network supply since this system is incompatible with our devices. It damages the thermostat.
During shedding periods, your radiator displays “Off”. It then comes back to its initial operating mode.
MAINTENANCE
To retain the performance of the device, it is necessary about twice a year to carry out dust removal using a
vacuum cleaner or a brush at the air inlets and outlets. Every five years, have the inside of the device checked
by a professional electrician. The outside of the device can be cleaned with a damp cloth.
Never use abrasive products or solvents
