38
External programming
The device follows external control commands of your system by control wire connection
or radio connection
.
To control a device(s) from a control point
outside of your system, you
must:
1) exchange the security key before the association at the control unit. To make it, send
or receive the security key (see "Expert Menu" section).
2) authorize the association on each device if your system is equipped of our brand
control unit
(see "Expert Menu" section).
If some devices are connected together, send the security key from only one
device.
If some devices are not connected together, exchange the security key on each
devices.
5.3.2 - Changing internal programs :
You can program up to 3 Comfort temperature ranges for each day of the week.
Outside of these ranges, the device will reduce temperature (default setting at -3.5°C).
You can change ranges by pressing ▼/
and validate with
.
Examples of programming :
Two comfort temperature ranges
:
- from 6:00 a.m. to 8:00 a.m
- from 5:00 p.m. to 11:00 p.m.
Three comfort temperature
ranges :
- from 6:00 a.m. to 8:00 a.m
- from 12:00 p.m. to 2:00 p.m.
- from 5:00 p.m. to 11:00 p.m.
One comfort temperature range :
- from 6:00 a.m. to 11:00 p.m.
Copying a program
You can copy the program set for one day and apply it to another (several) day(s).
Scroll through the days with
. Copy with ▼/
. Return to the previous day with
.
Summary of Contents for Maradja Digital
Page 49: ... 47 ...
Page 50: ...48 ...
