Atlantic FF4016, Product Manual, Page: 4 / 12

4
Using Cord Seal Fitting (Optional)
If you would rather pass the pump cord
through the wall of the basin rather than
over the top under the cap stones, you may
wish to install a bulkhead fitting and Cord
Seal Fitting. Install a bulkhead fitting
following the directions above. Install a 11/2”
male adapter in the bulkhead fitting. Run
the cord directly through the bulkhead
fitting and 1½” male adapter. Follow the
Cord Seal Fitting directions to seal the cord
in the bulkhead. (Figure 5)
Winterizing
In areas where freezing is a concern, the pump(s) must be removed from the basin before
winter and stored in a dry place. Ensure any water has been removed from plumbing lines
and they are plugged. This will keep the lines from refilling and freezing over the winter.
Fountain toppers or decorative features should be winterized according to best practice.
Warranty
This product carries a one-year warranty. This warranty is extended solely to the
original purchaser commencing from the date of original purchase receipt. A misused or
abused product voids this warranty.
Warranty Claims
In case of warranty claims, the complete Basin should be returned to the place of purchase
accompanied by original receipt.
Figure 5