19
4) maintenace
- Switch off the device before any maintenance is performed.
-To maintain the performance of the device, about twice per year,
clear the dust.
do not use abrasive products.
B
C
D
A
U
Sing The deviCe
Control box
a
Mode selection and control locking
wheel.
B
2h Boost, 24h Auto heating, 24h Auto
Drying and locking function operating
light.
C
Heating light
d
Temperature setting wheel
Your device gives you the capability of using several functions:
-
The 2h Boost function
, which enables you quickly to raise your room’s temperature. Your device
will operate at maximum power for 2 hours.
-
The 24h auto heating function
, which enables you to repeat the 2h Boost function every
24 hours. Your device will operate at maximum power for 2 hours every day of the week at the same
time.
-
The 24h auto drying function
, which enables you to heat and dry your towels every day of
the week at the same time. This is ideally used during mid-season; the device is set for moderate
heat.
-
The Locking function
enables you to set the heating mode you have selected (
e.g.:
ON
mode, tem-
perature set with the wheel on
). It is used to prevent inadvertent manipulation of the device (
for
instance by children, etc.
).
Central programming control (
see programmer instructions
)
Centralised programming (
via the Pilot Wire
) enables you to make savings by programming temperature
reductions when you wish, depending on the bathroom’s period of use.
gB
Summary of Contents for 2012
Page 65: ...64 U0615103 B Aout 17 ...
