background image

Copyright © 2018 Atlantic Technology International.

Specifications are those in effect at the time of printing. Atlantic Technology reserves 
the right to change specifications or designs at any time without notice. Dolby Digital, 
AC-3, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing 
Corporation

Table of Contents

 

3  Model SBT-1000 and SBT-500 Subwoofers

  4-5  Subwoofer Rear Panel diagrams
 

5 Features

 

6  Connecting Your Subwoofer

 

    Subwoofer Line Out to Low Level In

 

    Power Connection

 

7  Low Level Connection

One Subout/LFE Output

 

8  Low Level Connections

Two Subout/LFE Outputs

 

9  Placement and Operation

 

9  System Setup

 

    Subwoofer Tuning Without Aides

 

    How Much Bass is Enough?

 

10

    Using the Subwoofer Lowpass Control

 

    The Phase Invert Control

 

     Center Channel Modes

 

     Care of Your Subwoofer

 

11     Troubleshooting  Guide

 

     Specifications

Safety Precautions

The lightning flash with arrowhead, 

within an equilateral triangle, alerts the 

alert the user to uninsulated “dangerous 

voltage” within the product enclosure that 

may be of sufficient magnitude to consti-

tute a risk of electrical shock to persons.

The exclamation point within an 

equilateral triangle alerts the user to 

important operating maintenance or 

servicing instructions in the literature 

accompanying the appliance.

2

Safety Precautions

SBT-1000  &  SBT-500  Powered  Subwoofers         

CAUTION:

 To reduce the risk of electric shock, do not remove 

the cover (or back). No user serviceable parts inside. Refer to 

qualified personnel.

WARNING:

 To reduce the risk of fire or electric shock, do not 

expose this appliance to rain or moisture. This device generates 

a fair amount of heat. Make sure nothing blocks the ventilation 

openings on the top and bottom of the unit.

For Future Reference

Record your speaker and amplifier serial numbers and date 

of purchase here:

Model Number 

Serial Number 

Date of Purchase 

 

The serial number is found on the back panel.

Summary of Contents for SBT-1000













Reviews: