4
AW-5 Indoor/Outdoor Speaker
Mounting
Mounting Your Speakers
Use the supplied mounting brackets to mount the speakers vertically or
horizontally on exterior house walls, deck corner posts, or other secure
surfaces. The bracket has holes to facilitate a variety of mounting hardware.
Always consult a knowledgeable installer regarding the best hardware
to use on your mounting surface.
To mount the speaker, loosen the knobs and remove the bracket from the
speaker. If you are running speaker wires, you may route the wires through
the large hole in the middle of the bracket; the bracket will then cover the
wire hole in the wall.
Mount the bracket in its desired location.
With the bracket mounting knobs loosened, slide the speaker/knob assem-
bly into the mounting channels in the bracket until the speaker “seats” in the
final position. Adjust the speaker to the desired angle and tighten the knobs
to secure the speaker in place. (See below)
You may also use mounting brackets made by other companies, if you
choose. The ¼-20 threaded inserts for the knob posts, and the 6mm insert
on the back, are the exact same thread sizes used by many manufacturers
for their various mounting devices.
