Atlantic Technology Atlantic FS-4000 Instruction Manual Download Page 2

Front Stage Loudspeakers

Table of Contents

The contents of this manual are Copyright © 2006 by Atlantic Technology International, 
Corp., and may not be duplicated or reproduced by any means, whether physical, electronic 
or otherwise without prior written consent from Atlantic Technology International, Corp.

Atlantic Technology and the Atlantic Technology logo are registered trademarks of Atlantic 
Technology International, Corp.

Specifications are those in effect at the time of printing. Atlantic Technology International, 
Corp. reserves the right to change specifications or designs at any time without notice 
without obligation to modify existing units. 

FS-4000 and FS-5000  

Front Stage Loudspeaker

Thank you for choosing Atlantic Technology products. Your new speakers  
are precision-crafted to give you years of enjoyable, trouble-free service. This 
manual covers the Atlantic Technology System FS-4000 and FS-5000 speak-
ers. It will show you how to incorporate these speakers into your present 
setup, as well as how to assemble a complete system from them. These sys-
tems can be used with all current and past sound formats including Stereo, 
Dolby Surround®, Pro Logic®, Dolby Digital 5.1®, Dolby Digital EX®, DTS®, 
DTS ES®, DTS ES Discrete®, DTS Neo:6®, DVD-Audio and SACD Audio.

IMPORTANT:

 Although it may seem like asking for driving directions, 

please take a few moments to read all of this booklet. It has many 
helpful tips and ideas on properly setting up and using your system. 
We promise that if you take the time to read and follow these tips 
you’ll get better system performance and more enjoyment.

Unpacking the Speaker

Use care when unpacking the speakers. Remember to keep the original 
boxes and packing material, in the unlikely event the speakers need servic-
ing, or if you move.

Attaching the Grille

The included metal grilles are held to the front of the enclosures with power-
ful neodymium magnets. There are depressions on the back of the grille that 
the magnets fit into. Once the speakers are in their final position. Position the 
grille over the magnets on the baffle. Move them together slowly and when 
you get close enough, the magnets will draw the grille in and hold it tight. Be 
careful not to get your fingers caught between the grille and the cabinet.

Table of Contents

    Unpacking the Speaker
    Attaching the Grille
  3  Description

  3

 

Model FS-4000 and FS-5000 Front Stage Loudspeaker

  3

 

Acoustic Controls

  4  Placement

  4

 

Speaker Placement and Home Theater

  5 

Assembling the Speakers

  6  System Setup

  6

 

Using the Rear Panel Controls

  6

 

System Setup When Using an Optional Subwoofer

  6

 

System Setup Without a Subwoofer

  7 

Speaker Placement — Optional Surround and Subwoofer

  8 

Using Surround Speakers

  8

 

Setting Levels

  8  Connecting Your System

  9 

System Wiring

 10  Care of Your Speakers
 11  Specifications

For Future Reference

Record the serial number and date of purchase of the speaker here. The serial number is 
found on the speaker terminal panel on the back of the enclosure.

Serial Number

Date of Purchase

Summary of Contents for Atlantic FS-4000













Reviews: