Atlantic Technology 8200 System Instruction Manual Download Page 2

2                    

8200/6200 Pedestal Subwoofer System 

CAUTION:

CAUTION:

 To reduce the risk of electric shock, do not remove the 

 To reduce the risk of electric shock, do not remove the 

cover (or back). No user serviceable parts inside. Refer to qual i fi ed per-
sonnel.

WARNING:

 To reduce the risk of fi re or electric shock, do not expose 

this ap pli ance to rain or moisture. This device generates a fair amount of 
heat. Make sure nothing blocks the ventilation open ings on the top and 
bottom of the unit.

The lightning fl ash with arrowhead, with in an equi lat er al 
triangle, is in tend ed to alert the user to the pres ence of 
uninsu lated “dangerous volt age” with in the prod uct’s 
en clo sure that may be of suffi cient mag ni tude to con-

 sti tute a risk of elec tri cal shock to per sons.
The exclamation point within an equi lat er al tri an gle is 
intended to alert the user to the presence of im por tant 

operating main te nance (ser vic ing) in struc tions in the 
lit er a ture ac com pa ny ing the appliance.

For Future Reference

Record your speaker and amplifier serial numbers and date of 
purchase here:

Model Number                                                                              

Serial Number                                                                                

Date of Purchase

The amplifi er serial number is found on the back panel. The subwoofer 
serial number is found on the back of the pedestal cabinets.

Table of Contents

Safety Precautions

                    

                    

Safety Precautions

IMPORTANT NOTE

These  instructions  are  for  Atlantic  Tech nol o gy  Pedes-
tal  Subwoofer  systems  using  the  SA-6200  Mono  and 
SA-8200 Dual Mono Subwoofer amplifi ers. All instructions and 
in for ma tion pertain to both sys tems. Note that the SA-6200 ampli-
fi er only has one set of front mount ed controls and one set of input/
output connectors on the back and is designed to work with a pair 
of 6200 Pedestal Subwoofers.
The unique design of these driv ers and amplifi ers means that 
they must only be used to geth er, with each other. 

You should never 

at tempt to use a different amplifi er with these woofers or dif fer ent 
woof ers with these amplifi ers.

3  8200 and 6200 Pedestal Subwoofer System
4  Features

4       PedWoofer Modules
4       SA-6200 and SA-8200
4       THX Ultra 2 Certifi ed (SA-8200), 

THX Select Certifi ed (SA-6200)

4       Test and Training CD-ROM

5  Amplifi er Front Panel
6  Amplifi er Back Panel
7  Remote Control
7  Connecting Your PedWoofers

7       Low Level Connection (LO IN)
7       Using the Low Level Thruput (THRU)
7       High Level Connection (HI IN – SA 8200 only)

8  SA-6200 Low Level Connections
9  SA-8200 Low Level Connections with One 

SubOut/LFE Output

10  SA-8200 Low Level Connections with Two 

SubOut/LFE Outputs

11  SA-8200 High Level Connections
12  Remote Control Connections

12       Power Connection

13  PedWoofer Placement

13       When Used As Bases for the 8200/6200 LR Satellites
13       Mounting the LR Satellites to the PedWoofers
13       When Used As Free-standing Subwoofers
13       Dual PedWoofer Placement
14       Installing the Feet on the PedWoofer

14  System Setup and Operation

14       The Low Pass Control
14       Bass Management
15       The Phase Control
15       Parametric Room Equalizer (EQ) 
15       Adjusting the Parametric EQ Using a Meter or 

Real Time Analyzer (RTA)

15       Setting the Parametric EQ Using an SPL Meter
16       Satellite Level Setting Using an SPL Meter
16       Level Setting Without an SPL Meter
16       Setting the Subwoofer Level Without an 

SPL Meter or Test Tones

16       How Much is Enough?

16  Remote Control Functions
17  Direct Access Connector
17  Care and Feeding of Your PedWoofer System
17  PedWoofer Troubleshooting Guide
18  Specifi cations
19  Program EQ Setting Curves

Copyright © 2003 Atlantic Technology International.
Specifi cations are those in effect at the time of printing. Atlantic Technology reserves the 

right to change specifi cations or designs at any time without notice. THX and THX Ultra 2 

are registered trademarks of Lucasfi lm, Ltd. Dolby Digital, AC-3, Dolby Stereo and Dolby 

Pro Logic are trademarks of Dolby Laboratories Licensing Corporation. 

Summary of Contents for 8200 System





















Reviews: