Atlanta ATH-853, Instruction Manual

Page: 6 / 20

6
INSTRUCTION MANUAL
8. Watch the speed of movement of the device when clipping. The best results can
be achieved when the device moves with its internal speed without being manually
accelerated.
9. The final treatment should be performed without an attachment by light stroking
movements along the hair growth direction starting from the crown.
10. After cutting the main part of the hair should set the lever to adjust the removal
of hair in the upper position and trim a little. In this position of blades the
hair clipper will take off a little. To trim back side use down a little gentle
movements.
The tapering system is recommended to be pulled out during the
final treatment and the taper itself, if an excess volume is to be eliminated. During
tapering, immerse the blade with the pulled out tapering teeth a little bit deeper and
try to use rare and long strokes moving the device quickly without an interruption.
11. Upon completion of clipping, set the switch (C) in the off position. If the device
was plug-in, do not forget to disconnect it.
NOTES
• The hair clipper can continuously operate for 25 minutes maximum in order to
prevent from overheating of the motor. You can continue operation after a 10-minute
break.
• The device is designed for clipping dry hair; do not use it for clipping wet and
soppy hair.
• This hair clipper is vibrational type, and a slight vibration is normal.
• The manufacturer reserves the right to make additional modifications in design
of the hair clipper in order to enhance its consumer attributes.
SAFETY PRECAUTIONS
• The hair clipper is intended for operation from the power source which
performance is specified in the manual.
• The device is not intended for use by persons (including children) with reduced