Atlanta ATH-633, Instruction Manual

Page: 3 / 20

3
EN
3-6
RUS
7-11
UA
12-16
INSTRUCTION MANUAL
DEAR CUSTOMER!
OUR CONGRATULATIONS WITH LUCKY CHOICE! YOU ARE HOLDER OF PRODUCT UNDER
“ATLANTA” TRADEMARK WHICH IS CHARACTERIZED BY STATE-OF-THE-ART DESIGN AND
GOOD QUALITY OF PERFORMANCE. WE HOPE THAT OUR PRODUCTION WILL BECOME
YOUR COMPANION FOR A LONG TIME.
WARNING:
DON’T ARRANGE KETTLE NEAR HEAT SOURCES, SUCH AS: HEATING RADIATORS,
GAS STOVES, OR AT PLACES EXPOSED TO DIRECT SUN RAYS, EXCESSIVE DUST,
MECHANICAL VIBRATION OR IMPACT LOADS. DON’T COVER THE KETTLE IN ANY WAY.
PULL THE PLUG TO DISCONNECT THE POWER SUPPLY CORD. NEVER PULL THE CORD.
AVOID PENETRATION OF WATER OR OTHER LIQUIDS TO THE BASE UNIT WITH CONTACT
BLOCK AS I MAY CAUSE DAMAGE OF THE KETTLE. IN CASE OF TRANSPORTATION
UNDER THE REDUCED TEMPERATURE CONDITIONS DO NOT PLUG IN THE KETTLE LESS
THAN TWO HOURS OF ITS STORAGE IN WARM PLACE. DON’T LEAVE THE KETTLE WITH
THE WATER UNDER CONDITIONS OF TEMPERATURE BELOW FREEZING POINT: IT MAY
CAUSE DAMAGE OF KETTLE HOUSING. DON’T USE ANY REACTIVE LIQUIDS (GASOLINE,
KEROSENE, ALCOHOL, DIFFERENT SOLVENTS) FOR KETTLE CLEANING.
ATTENTION!
IN ORDER TO AVOID IGNITION OR ELECTRIC-SHOCK HAZARD DON’T EXPOSE THE
ELECTRIC PART OF THE KETTLE TO RAIN OR WATER EXPOSURE. DON’T SUBMERGE
THE KETTLE INTO WATER OR OTHER LIQUID. MAINTENANCE SHALL BE MADE BY THE
QUALIFIED SPECIALIST ONLY.