6
INSTRUCTION MANUAL
SCALES OPERATION
1. Place scale onto solid, steady, horizontal surface.
2. Push the switch on button (D). Wait few seconds until scales reset to zero
sensors indications and self-testing operation.
3. Enter the clock adjustment mode «T-SET». When the display starts flashing, set
the time using the « » buttons. Pay attention to the selection of the «AM/PM» time
of day symbols. Press «T-SET» to confirm the settings.
4. Set the weight on the scale platform and the display will display the weight in
the specified units. Distribute the load evenly in relation to the center of the weight
platform.
5. The scales are equipped with a function of zero weight. When weighing up to
200 g. the display shows the «ZERO» function symbol - . If the weight is more than
200 g. the «TARE» function symbol- is displayed . After the display has reset to zero,
place the container on the platform and then press the « ZERO/TARE» button (G),
the display will reset to zero again, and you can continue weighing without taking
into account the container. However, the maximum weight allowed for weighing will
be reduced by the tare weight. You can also set the container before turning on the
scale, the weight of the container in this case will also not be taken into account.
6. Scales designed for weighing the weight to 5 pounds. If the indicator is
overweight, it will display an error. If you use a bowl or other weighing device and
reset its weight to zero, the maximum allowed weight will be reduced by the weight
of this bowl.
7. To change the units of weight measurement, press «UNIT»button. Hold the
button for 3 seconds to change the units of measurement «kg/ld: oz».
With a short click on the button, you can change the weight unit symbols - «kg/
ld:oz», as well as the volume unit symbols – «ml/fl»oz».
8. The Scale has a built-in thermometer. Temperature range from 0 to ~+40 C°.