Atlanta ATH-486, Instruction Manual

Page: 7 / 24

7
INSTRUCTION MANUAL
• Put the iron in a vertical position only.
• In order to reduce the risk of fire and electric shock:
-
do not use this appliance in damp rooms;
- do not plug the appliance if there is water on its surface;
- do not plug or unplug the appliance with wet hands;
- do not allow the plug to overheat; make sure the appliance is properly plugged;
- do not use the iron if the supply cord is damaged or wet;
- switch off and unplug the appliance before cleaning;
- never pull the power supply cord to unplug the appliance; instead, grasp the plug
and pull to disconnect;
-
store the appliance in a cool dry place.
• This iron is for personal use only.
• This iron is equipped with a European plug. Use a grounded outlet.
• If the appliance is damaged during use, disconnect it from the power supply
immediately. Never attempt to repair the appliance yourself; take it to the nearest
Authorized Service Centre and show your warranty ticket.
CLEANING AND CARE
• The iron needs regular cleaning. Keep the soleplate smooth, do not allow the
surface come in contact with metallic or other hard objects.
• This iron is equipped with self-cleaning function. That function allows remove
part of the calc salts from the steam-generating system of the iron. In order to use
this function fill water tank by 240ml of soft or distilled water, turn the heat regulator
to «MAX» position and press «self clean» button. You should hold it in a horizontal
position above some container for a dirty water getting out. To achieve best results
please lightly shake the iron and not just hold it.
• Unplug the iron and leave it to cool down, then use a soft damp cloth to clean it.
Do not clean the iron with chemically active liquids or abrasive washing agents, as
they can damage the surface.
• Wipe the iron soleplate with a damp cloth.
• Do not clean the iron with the help of other tools.
• Never immerse the appliance in water or other liquids.
ENVIRONMENTAL PROTECTION
The old devices are the package of the technical materials; therefore they can not
be recovered with the domestic waste! On that reason, please,
support us in the resources saving and environmental protection
and return the unit to the recycling center (if applicable).