User`s Manual
Page 12 of 18
Press [
▲
/
▼
] to move cursor up or down.
z
Longitude:
Input the longitude directly by 0~9 numeric buttons.
z
Location:
Set the location.
Press
[
◄
/
►
] to switch between West/East.
z
Latitude:
Input the latitude directly by 0~9 numeric buttons.
z
Hemisphere:
Set the hemisphere.
Press
[
◄
/
►
] to switch between South/North.
z
Move to position:
Press [OK] to move to your setting position.
5.
Press [OK] on <Auto Scan> option to enter dish set-up menu.
Press [
▲
/
▼
] to navigation.
z
Satellite:
Select the satellite you want to find by [
◄
/
►
] or press [OK] to enter the satellite list to select.
z
Motor:
It is defaulted set for “DISH SET-UP” menu. It was not allowed to modify unless you enter “DISH SET-UP” menu.
z
Transponder:
Select the transponder you want, the LOCK light turns on and the warning rings when it was switched to the
TP which has signals.
z
Search mode:
Select the channel mode which you want to search. Press [
◄
/
►
] to switch between All channels and FTA.
z
Search:
Select search scope, Satellite /Transponder/Blind. Press [OK] to start scan channels.
2.5 Angle Calculation
1. Press the [MENU] to display the main menu.
2. Use [
▲
/
▼
] to move cursor, press [OK] on <Angle> option, the following window will appear.
