Atlanta Attachment Company 1390HCB, Technical Manual & Parts Lists

Page: 32 / 147

Technical Manual & Parts Lists
25
Editing Motor Drive Parameters
In effort to minimize the amount of information that the operator/mechanic has to look through,
only the pages that pertain to the drive programming and drive faults are shown here. For more
information refer to the manufacturer’s (AC Tech) manual included with the machine.
Motor Drive Parameters
Note: A Complete Motor Drive User Manual is included in the machine documentation package.
PARAMETER DESCRIPTION OUTFEED DRIVE BOTTOM FILM TOP FILM INFEED DRIVE
1 208/230 02/01 02/01 02/01 02/01
2 DEFAULT 02 02 02 02
3 DEFAULT 01 01 01 01
4 RAMP DECEL 03 03 03 03
5 PRESET 1 02 02 02 02
6 DRIVE OK 03 03 03 03
10 TB-13A = REVERSE 06 06 06 06
11 TB-13B = PRESETS 04 04 04 04
12 TB-13C = PRESETS 04 04 04 04
14 DEFAULT 01 01 01 01
16 DEFAULT 02 02 02 02
17 ROT. FWD AND REV 02 02 02 02
19 ACCEL .8 0.3 0.3 .8
20 DECEL .2 .4 .4 .2
21 DEFAULT 0.0 0.0 0.0 0.0
22 DEFAULT 0.0 0.0 0.0 0.0
23 DEFAULT 0.0 0.0 0.0 0.0
24 MAX FEQUENCY 60.0 60.0 60.0 60.0
25 208/230 150/180 150/180 150/180 150/180
26 DEFAULT 100 100 100 100
27 BASE FREQUENCY 60.0 60.0 60.0 60.0
28 208/230 20/10 20/10 20/10 20/10
29 DEFAULT 0.0 0.0 0.0 0.0
30 DEFAULT 0.00 0.00 0.00 0.00
31 SPEED 1 25.0 20.0 20.0 25.0
32 SPEED 3 40.0 56.0(51.6*) 50.0(51.6*) 40.0
33 SPEED 2 20.0 46.9 (45.2*) 40.0(45.2*) 20.0
34 DEFAULT 0.0 0.0 0.0 0.0
35 DEFAULT 0.0 0.0 0.0 0.0
36 SPEED 4 60 60.0 60.0 60
37 DEFAULT 0.0 0.0 0.0 0.0
* If rollers are rubber coated
3