atiz BookDrive Mark 2, Setup

Page: 18 / 21

How to make image straight
When the camera is not perfectly aligned resulting in a slightly rotated
image, you can do micro adjustment at the plate where the camera is
mounted.
If you image looks like A, then loosen the screws 1 slightly and then adjust
screws 2 to compensate until the image is properly aligned. Once the camera
is properly aligned then proceed to tighten screws 1 .
If you image looks like B, loosen screws 1 and then adjust screws 3 to
compensate until image is aligned properly. Once it is aligned then tighten
screws
3 .
Your image should come out straight and look like this.
17