13
Do not operate machine before having read the
operating instructions, understood all the notes
and assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
Extent of delivery
13
Symbols machine / operating instructions
13
Normal intended use
13
Residual risks
14
Safety instructions
14
Description of device / spare parts
16
Assembly 17
Location 17
Commissioning 17
Working with the log splitter
18
Maintenance and care
19
Transport instructions
20
Storage 20
Guarantee 20
Possible faults
20
Technical data
21
Wiring diagram
21
Hydraulic diagram
21
EC Declaration of Conformity
109
Extent of delivery
After unpacking, check the contents of the box for
completeness
possible transport damage.
1x Pre-assembled
device
unit
1
1x Protective
arm
2
1x Safety
hook
3
1x Log
lifter
4
2x Wheel
5
1x Wheel
axle
6
1x Transport support wheel
7
1x Fastener
bag
8
1x Operating
instructions
9
1x Assembly and operating instruction sheet
10
1x Warranty declaration
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Symbols on the machine
Carefully read operator’s manual before han-
dlingthe machine.
Wear hearing protection when working with the
machine to protect your hearing.
Wear safety goggles when working with the
machine to protect the eyes from chips and
splinters.
Wear safety shoes when working with the ma-
chine to protect the feet from falling logs.
Wear safety gloves when working with the
machine to protect the hands from chips and
splinters.
Do not expose to rain. Protect against humidity.
It is prohibited to remove or modify protective
and safety devices.
Must be operated by a single person only.
Keep bystanders as well as pets and do-
mestic animals away (minimum distance 5
m) from the danger zone.
Cutting and crushing risk! Never touch danger-
ous areas when splitting blade is moving.
Keep your workplace in an orderly condition!
Untidiness can result in accidents.
Caution! Moving machinery parts.
Always pay full attention to the splitting blade’s
movement.
Do not remove jammed logs with your hands.
Caution!
Switch off the motor and disconnect the mains
plug before performing cleaning, maintenance
or repair work.
Dispose of the old oil properly (local oil disposal
point). The old oil must not be poured into the
ground or drainage system, or mixed with other
waste.
Vent the hydraulic system before
putting the log splitter into opera-
tion. (see “Start-up”)
