Atid AT911N series, User Manual

Page: 12 / 33

AT911N User Guide
12

NOTE:
Data located in RAM will be preserved in the state of power-off, if the battery remains and program will be recovered
when the device is turned on once again. When main battery discharges perfectly, data saved in RAM will be
disappear. In that case, system will be restarted after energizing the power.

Use of Automatic Low-Power Mode (Sleep mode)
If the user doesn’t use the device for setting time, system enters into the low power mode (sleep
mode) automatically. User also can change the setting time in control panel and power management
as below. Using proper time-out setting prevents the system is on a long time without the user and
extends hours of battery use.
[Menu] -> [Application] -> [Setting] -> [Display] ->[Sleep]
Enter the screen as above in case of that User double clicks the <Display> Icon
The system will be turned on by pushing <Power> button even if system moves into the Low-Power Mode in
accordance with automatic low-power mode.

Turn Off the battery in case of discharging
System will be automatically entered into the Low-Power mode(Sleep-mode) when the main
battery discharges. At this point, system doesn`t work even if user pushes the <Power>
button. In that case, user can turn on the device after charging the main battery or
connecting the device with charger jack.
1.4
Check the Battery Level
 NOTE:
Using time of battery is influenced by using method, surrounding environment. In
general, user can use the device for 6 or 12 hours after charging the main battery at full

Check the Battery Level