25
AT907 User Guide
•
Illumination : User can set whether or not a enable LED beam for aiming when reading a
barcode.
•
Aiming Pattern : User can set whether or not the spot aiming function works.
•
Filter invisible char : User can set whether to handle invisible characters of read data.
•
Filter pre/suffix blank : User can set whether to handle spaces that stick before and after the
read data.
•
Decode Time Limit (ms) : Sets the amount of time to wait for the data to be read when the
barcode function is activated. The set value can be set in
“
ms
” unit
. (ex. 1 second = 1000 ms).
•
Result char set : You can choose between
“
UTF-8
”
and
“
gbk
”
how to output read data.
•
Prefix : Enter a specific value to output the data by putting it in front of the read data.
•
Suffix : Enter a specific value to output the data after the read data.
•
Append ending char : Add specific actions after data output. Each movement is as follows.
-
ENTER : After outputting the data, change the line and output the following data.
-
TAB : After outputting data, add as much space as
“
TAB
”
and output the following data.
-
SPACE : After outputting data, add as much space as
“Space”
and output the following data.
-
NONE : After the data is output, no action is taken, followed by the data being output.
•
Float Button : Activate the virtual button that can operate the barcode scanner as shown below.
When activated, the virtual button is free to change its location and will always be visible even if
user activate another app.
•
Stop scan on up : When this option is enabled, the barcode scanner only works when the trigger
button is pressed.
•
Continuous Scanning : When this option is enabled, automatically and continuously activates
the barcode scanner without pressing the button.
•
Scanning Interval(ms) : If "Continuous Scan" option is enabled, user can set this option up. Sets
the action interval for continuous actions. The set value can be set in
“
ms
” unit
.
