AT188N User guide
Page 20
AT188N User guide
AT188N Product User guide
Company
ATID Co., Ltd.
Doc Name
User guide
Writer
Won-Tak Choi Date
2016-03-02
Ver.
v0.3
automatically turned off itself after designated time. “*” is marked at the present
settings
7.2
System Configuration
7.2.1
“1. Barcode”
User can choose to read the barcode symbol or not. The item that can be set will be
changed in accordance with the type and supportive function of module. The “*” is
marked at the Enable item.
7.2.2
“
2. UHF RFID”
(UHF Only)
Set up the operating order of RFID and Barcode Reader and basic function of RFID
Module
“1. READER”: Set up the barcode and RFID operating mode
“BARCODE “
: Set up the exclusive barcode mode and, read the only barcode
when user pushes the scan button
“UHF RFID”
: Set up the exclusive RFID mode, read the only UHF RFID Tag
when user pushes the scan button.
“BARCORDE–RFID”
: Set up either barcode mode or RFID mode at the scan
ready. These two modes can be converted by pressing the ▲ key.
“BRFID”
: Set up the both barcode mode and RFID mode
“
2. MODE”:
Set up the tag Reading Mode of RFID among Multi Tag / Single Tag / Multi
Repeat
10:00P
?
BARCODE
* UHF RFID
BARCODE–RFID
RFID
10:00P
?
None
* 1 minute
2 minutes
5 minutes
10 minutes
