Aticio 816, Operating Instructions Manual, Page: 481 / 580

Loading Paper
77
7
Orientation-Fixed Paper or Two-Sided Paper
This section describes loading paper that has a specified orientation and printing
side (such as letterhead paper).
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead
paper, prepunched paper, or copied paper) might not print correctly, depending
on how the originals and paper are placed. Select
[ On ] in [ Letterhead Setting ] un-
der [ Copier Features ] , and then place the original and paper as shown below. See
“Copier Features”, General Settings Guide.
When printing with the printer function, placing orientation is the same.
❖
Original Orientation
*1
When copying in this orientation using the duplex function, select [ Always Specify ] in
[ Orientation ] under [ Copier Features ] (User Tools). Place originals, and then select
as the original orientation.
*2
When copying in this orientation using the duplex function, and loaded paper ori-
entation is L , place originals as shown below:
Under [ Copier Features ] , if [ Orientation ] is set to [ Always Specify ] , load paper in
orientation.
Exposure glass ARDF
*1
*2
*1