Page 3
Making the Connections
Connecting XCLAIM TV to your computer
Use the Shut Down command to turn off your
computer.
Align the pins at one end of the enhanced S-video
cable with the S-video input connector (
S VID IN)
on
the back of your XCLAIM VR card, and insert
gently
(refer to the illustration on the next page).
Align the pins at the other end of the S-video cable
with the S-Video Output connector (
) on your
XCLAIM TV tuner, and insert
gently
.
Connect the cable TV or antenna line to the CATV
input (
) on your XCLAIM TV tuner.
!
•
Static electricity can damage sensitive electronic
components. Discharge your body’s static electric
charge by touching a grounded surface — for
example, the metal area of the computer chassis —
before performing any hardware procedure.
•
The manufacturer assumes no liability for any
damage, caused directly or indirectly, by improper
installation of components by unauthorized service
personnel.
If you do not feel comfortable
performing the installation, consult a qualified
technician
.
•
Make sure power is off during installation;
otherwise, damage to the TV tuner, the graphics
accelerator card, and injury to yourself may result.
1
2
3
4
