ATI Technologies X1900 - Radeon XTX 512 MB PCIE Video Card User Manual Download Page 18

Page: 18 / 160

10 Advanced Installation: AGP

Installing the Radeon® graphics card

Turn off the computer, monitor, and other peripheral devices.

Unplug the computer’s power cord and disconnect all cables from the
back of your computer.

Remove the computer cover.

If necessary, consult your computer’s manual for help in removing
the cover.

Unscrew or unfasten and remove any existing graphics card from
your computer.

Note:

If your computer has an on-board graphics capability, you may

need to disable it on the motherboard. For more information, see your
computer documentation.

Locate the appropriate slot and, if necessary, remove the metal back-
plate cover.

Power Cable Connector

4-Pin Power Connection

Power Extension Cable: Power Connector to Graphics Card

Power Extension Cable: Power Connector to Hard Drive

Power Extension Cable: Power Connector to Power Supply

Hard Drive

Power Connector to Hard Drive

WARNING

- Wait approximately 20 seconds after unplugging the

power cord before disconnecting a peripheral or removing a
component from the motherboard to avoid possible damage to the
motherboard.

WARNING

- Remember to discharge your body’s static electricity by

touching the power supply or the metal surface of the computer
chassis.

[email protected] -- POWER COLOR

-- 202.133.241.51 -- Sunday, December 25, 2005

Summary of Contents for X1900 - Radeon XTX 512 MB PCIE Video Card

































































































































































Search results

Summary of Contents for X1900 - Radeon XTX 512 MB PCIE Video Card

Reviews:

Related manuals for X1900 - Radeon XTX 512 MB PCIE Video Card

Brands by name

Popular brands

ATI Technologies X1900 - Radeon XTX 512 MB PCIE Video Card, User Manual

Search results

Summary of Contents for X1900 - Radeon XTX 512 MB PCIE Video Card

Reviews:

Related manuals for X1900 - Radeon XTX 512 MB PCIE Video Card

Brands by name

Popular brands