ATI Technologies Radeon, Online Manual

Page: 8 / 87

5
Windows
®
“New Hardware Found”
New hardware will be detected after you restart your computer. To finish setting
up your hardware click
Yes when prompted to restart
To identify new hardware in Windows
®
98 SE or Windows
®
Me
1 Windows
®
98 SE or Windows
®
Me may launch the “Update Device Driver
Wizard” to install the Standard VGA Driver. If it does, follow the step-by-
step instructions below to allow Windows
®
to correctly identify your new
hardware.
If the Wizard does not appear, proceed directly to Installing the ATI Driver for
Windows® 98 SE, Windows® Me on page 5 .
2 Click Next .
3 Click Finish .
4 Insert your Windows
®
98 SE or Windows
®
Me CD into your CD-ROM drive.
5 Click OK .
6 Type the following:
D:\WIN98 or D:\WINME
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
7 Click OK .
8 Click Yes to restart your computer.
You are now ready to install the ATI driver. Proceed to Installing the ATI
Driver for Windows® 98 SE, Windows® Me on page 5 , and follow the step-
by-step instructions to complete the installation.
Installing the ATI Driver for Windows
®
98 SE, Windows
®
Me
With Windows
®
98 SE or Windows
®
Me running on your computer, you need
to install the ATI driver to take advantage of the higher performance, resolutions,
and special graphic features of the RADEON™/RADEON™ VE.
To ensure you install the latest driver, use the ATI Installation CD that shipped
with your RADEON™/RADEON™ VE.
To install the ATI driver for Windows
®
98 SE or Windows
®
Me
1 Insert the ATI INSTALLATION CD into your CD-ROM drive.
If Windows
®
runs the CD automatically, proceed to step 6.
2 Click Start .
3 Select Run .
4 Type the following:
D:\ATISETUP
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)