ATI Technologies RADEON X1550 SERIES, User Manual, Page: 76 / 148

68 All Settings
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time
Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking Discard applies to all features of an aspect, not just the feature in
the current view.
Restore default settings
1
Move the mouse to the bottom right-hand corner of the window.
2
Click Defaults .
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click
OK .
All Settings
The All Settings page combines all of the principal 3D features onto a
single page, without any preview window, allowing for quick access and
adjustment. You can change the settings for the following 3D features as
you normally would on each feature’s own page:
• Anti-aliasing
• Anisotropic filtering
• Catalyst™ A.I.
• Mipmap detail level
• Wait for display refresh
• Adaptive Anti-Aliasing
This page is useful when it is not necessary to preview the adjusted settings
because the effect is already known or understood.
Set the Anti-Aliasing preference manually
Set the Anti-Aliasing preference manually
1
From the Tree View pane, expand 3D .
2
Click All Settings .