Using Video In
Capture full motion or still image video
Your new RADEON™ graphics card has Video In (also known as Composite In)
capability for capturing full motion or still image video. Just attach a video
device such as a VCR, camcorder, or laser disk player to the Video In connector
on the back of your new graphic card.
Connecting a Video Device
To connect your computer to a video device such as a VCR, camcorder, or laser
disk player, attach a composite cable from the Composite Output connector on
your VCR, camcorder, or laser disk player to the Video In on your graphic card.
Most video devices such as VCRs, camcorders, and laser disk players have a
Composite Output, also referred to as an RCA output.
Connecting Your video device
1
Turn off your computer and your VCR, camcorder, or laser disk player.
2
Ensure your graphics card is installed correctly.
3
Locate the Composite Output on your VCR, camcorder, or laser disk player.
4
Looking at the back of your computer, locate your graphics card. Using a
Composite cable, attach one end of the cable to the Video In on your graphics
card and the other to the Composite Output on your video device.
5
Turn on your computer and your video device.
6
Use the ATI Multimedia Center to capture streaming Video or still images.
For detailed information on video capture, and various capture formats
available, refer to the Online User’s Guide included with your ATI Install CD
ROM.
4012220.fm Page 2 Friday, July 7, 2000 11:23 AM
