©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
S
e
pte
mbe
r
2
0
2
1
9
| Micro M5 Manual | v2.0
About the Micro M5 Parlour Control
The Micro M5 is a simple and easy to use parlour control. It uses embedded technology to provide all the
functionality and data storage required to run automation systems on herringbone, parallel and rotary
milking parlours for cows, goats and sheep.
It connects to a wide range of systems including cluster removers, milk meters, parlour automatic
identification, automatic drafting gates, backflush, automatic plant washers and dairy animal management
software.
General Features:
Memory can store up to 5,000 animals;
6 digit alphanumeric animal numbers;
Multiple attentions - milked, fed, hold milk, in heat, mastitis by quarter, test, dry, slow, low yield,
manual, high conductivity, damaged teat per quarter, colostrum and antibiotic - optional animal
already fed attention;
Feeding and milking prevention on attentions;
Optional audible attentions;
Stainless steel mounting bracket and fixing kit included.
Options:
Feeding and non-feeding versions available;
Store milking data using MM range of milk meters;
Automatically feed and store milk yields without keypad animal number entry using parlour
automatic identification;
Automatically sort animals using the Pegasus drafting system;
Connect to Cowculator M5 PC software to manage your animals, perform feed to yield and select
animals for drafting from the comfort of your farm office;
Connect to the internet to connect with the ATL App.
Milking Features:
2 or 3 milkings per day;
Connects to the CR35 cluster remover - stores milking start time, milking length and highest
conductivity value;
Connects to the MM range of milk meters - stores milking start time, milking length, milk yield,
highest conductivity valve and stall number.
Cowculator PC Software Additional Features:
Manage your animals using feed and yield history over multiple lactations;
Monitor animals health and medicine use;
Feed to yield and feeding based on days in milk.
Specifications:
12/24vDC switching positive or negative feeders as standard - 12-230vAC feeder switching voltage
optional using Feeder Interface
Drives electric, vacuum or compressed air feeders;
Electronic fuse detection with power supply failure warning;
Drives 16 feeders per side as standard - up to 100 feeders per side using Relay Extender Boxes.
Innovation In and Out of Parlour
