Manual, Flexdeburr, RS-340
Document #9610-50-1016-08
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati-ia.com • Email: [email protected]
34
8.
Specifications
Table 8.1
—RS-340 Specifications
Parameter
Rating
Motor
Turbine Motor
Idle Speed (RPM)
40,000
Torque (Max.)
0.08 N-m (0.7 lb-in)
Power
340 W (0.46 hp) @ 40,000 RPM
Weight (without Adapters)
1.2 kg (2.6 lbs)
Compensation (Radial)
+/- 5.5 mm max., +/- 3 mm recommended
Compliance Force
(Measured at Collet)
9.79-38.25 N (2.2–8.6 lb) at 1.0-4.1 bar (15–60 psi)
Bur Surface Speed
Dependent on the Cutter Geometry and Motor Speed
Spindle Air Pressure
6.2 bar (90 psi) (All Models)
Air Consumption (Idle)
2.8 l/s (6 CFM)
Air Consumption (Stall)
10.2 l/s (21.5 CFM)
Air Connection (Spindle)
3/8” Tube
Air Connection
(Compliance)
5/32” Tube
Sound Pressure Level
1
Less than 78 dB(A) (without Cutter)
Collet Size, Standard
2
1/4" (6 mm on the Euro Models)
Rotary Burs
3
Commercial Units Rated 40,000 RPM or Higher
Special Tools
Open End Wrenches
9/16” (14.5 mm)
7/16” (11 m)
Notes:
1. All noise emission measurements were taken under no load idle conditions without a cutting tool.
Because the working environment is unknown, it is impossible to predict the noise that will occur
during a deburring operation
2. Optional Sizes Available, See
.
