14
Installing the Hardware and Software
Windows
®
New Hardware Found
Windows may start the Add New Hardware Wizard to install
the Standard VGA Driver. To correctly install your new
hardware:
If you are using Windows
®
2000 or Windows
®
XP, Cancel the
Wizard and proceed to
Installing the CATALYST™ Software
Suite
on page 14
.
• If the Add New Hardware Wizard does not appear, proceed
to
Installing the CATALYST™ Software Suite
on page 14.
• If the Add New Hardware Wizard does appear:
1
Click Next to allow Windows
®
to search for the Standard
VGA or Standard PCI Graphics Adapter.
If prompted for the Windows
®
CD-ROM, insert it into your
CD-ROM drive.
2
Type the following: D:\operating system name (for
example, D:\WinME).
If D is not your CD-ROM drive, substitute the correct drive
letter.
3
Click OK, click Finish to close the Wizard, then restart
your computer.
Installing the CATALYST
™
Software Suite
ATI’s CATALYST software suite provides the ultimate software
required to enjoy the full power of your ALL-IN-WONDER
card. The CATALYST software suite comprises four, distinct
software elements:
• Display driver
• Multimedia Center
• HydraVision (not included in the Express Install)
• Remote Wonder Software
To ensure you install the latest software, use the ATI Installation
CD-ROM that shipped with your ALL-IN-WONDER card.
