ATI Technologies 3D XPRESSION, User Manual, Page: 18 / 40

14 Installing ATI’s Enhanced Drivers
Installing Enhanced Drivers for
Windows NT
After installing your graphics card, Windows NT will default to
standard VGA mode (640 x 480, 16 colors). The procedure
below describes how you install ATI’s mach64 enhanced driver
for Windows NT 3.5, and 3.51.
To install the mach64 enhanced driver for Windows NT
1
Boot Windows NT.
2
Double-click the Main icon.
3
Double-click the Control Panel icon.
4
Double-click the Display icon.
5
Click Change Display Type.
6
Click Change.
7
Click Other.
8
Insert ATI’s Installation CD-ROM into your CD-ROM drive.
For Windows NT 3.5, type the following:
D:\NT35 (If D is not your CD-ROM drive, substitute D with the
correct drive letter), then click OK.
For Windows NT 3.51, type the following:
D:\NT351 (If D is not your CD-ROM drive, substitute D with the
correct drive letter), then click OK.
9
Select ATI Graphics Accelerators.
10
Click Install.
11
Click Yes to change your system configuration.
12
Click Continue to confirm the full path name.
13
After the files have been copied to your computer, click OK.
14
Reboot Windows NT.
After reboot, the Invalid Display Settings window appears.
15
Click OK.
The Display Settings dialogue box appears.
16
Select a desired display mode. For more detailed information
about changing your display mode, click Help.
vx_ug.bk : chpt3.fm Page 14 Thursday, June 20, 1996 4:25 PM