©A
TLAgriculturalT
echnologyLimited:July2009
!
Red LED: Data Ready
Green LED: Communicating
ANTENNA
READER
Reader Indicators
Green: Read OK
Red: Active
Yellow: Pulsing
Reader Module
HAZARD: High Voltage
Link
Link
Link
Red
Black
Link
Link
Blue
Gr
een
Link
Red
l l l l l l l l l l l l l l l
Core
Screen
To Connector (READER)
The connections between the Reader the Tuning Coil and
the circuit board are Coaxial cable. They are shown
single and coloured here for clarity but the screens and
cores must go to the connections shown.
Screen
Core
The Reader is shown
vertically for clarity.
Tuning Coil:
Use this knob for fine tuning the antenna voltage.
Antenna Tuning Point:
Connect a multi-meter
set to DC Volts 200 across
the connectors:
Positive probe to:
Negative probe to:
!
MK3 OUT OF
PARLOUR REVIVER
INSTALLATION:
11A
Interface PCB Reader Connections - TIRIS S2000 Reader:
Reader
Connector
:
Red
(0.5mm)
Blue
().5mm)
Gr
een
(0.5mm)
N/C
RED
(1.0mm)
BLACK
(1.0mm)
TUNING
TU
NIN
G
CO
IL
Connections to the Reader Module and Tuning Coil:
These connections are factory fitted but are shown here so that they may be checked and verified.
