22 CrossFire™
CrossFire™
The CrossFire™ aspect requires the following components to be available in
order to appear as an option within Catalyst
®
Control Center:
• A CrossFire™-ready motherboard with at least two PCI Express
®
x16
slots.
• Two Radeon
®
X1950 Pro CrossFire™ graphics cards, one of which
must be installed in the primary PCIe™ or BIOS boot slot.
• Two internal CrossFire™ bridge interconnects.
Enable Catalyst
®
A.I. to automatically select the preferred rendering mode for
target applications. For applications that are not identified in Catalyst
®
A.I., or
when Catalyst
®
A.I. is disabled, default CrossFire™ rendering modes are
used. Alternatively you can enable the Super Anti-aliasing mode in Catalyst
®
Control Center.
For the latest information, see the CrossFire™ Web page at:
To access CrossFire™
• Select
CrossFire™
in Advanced View.
Enable CrossFire™
1
From the Tree View pane, click
CrossFire™
in Advanced View.
2
Click
Enable CrossFire™
.
When CrossFire™ is successfully enabled, all display devices, except the one
used by CrossFire™, will be disabled.
Note:
CrossFire™ Higher Quality anti-aliasing can be adjusted in the
Catalyst
®
Control Center 3D settings aspect.
hightech_maib -- HIGHTECH -- 202.82.32.137
-- Monday, October 30, 2006
Summary of Contents for 100 437807 - Radeon X1950 Pro HD PCI Express 256MB Video Card
