5
4
Startup and Shutdown
iii. Press
button to power on the device. You should see the
startup display (Fig.2) by looking through the eyepiece;
iv. While the display is active, hold the circle reticle on your tar-
get, press the
button to range the target.
v.
The binoculars will power-off after remaining idle for 25 seconds.
Setting the Display Focus and Diopter
These binoculars have a diopter (1), display focus (2), and a focus-
ing wheel (3)(Fig.3). The diopter and display focus will need to be
adjusted only once, before your first use, to ensure a clear display
and image simultaneously.
i. Press the
button to see the display. Use the display focus
to adjust until the display is clear.
Fig.3
Fig.2
