Atheros AR5001, User Manual

Page: 80 / 91

DO
N
OT
C
OP
Y
PRELIMINARY Chapter
4
Atheros Communications, Inc. Windows XP • 4 - 19
COMPANY CONFIDENTIAL July 2002 • 4 - 19
4. On the Wireless Networks tab, select the “Use Windows to configure my
wireless network settings” check box to enable automatic wireless
network configuration.
Refer to “Infrastructure Mode” on page 4-11 or “Ad Hoc Mode” on
page 4-13 to set up the station to connect to an infrastructure or ad hoc
network.
If you want to use non-default settings for power saving and turbo mode,
you should set those parameters through the NCP method (refer to
“Device Configuration” on page 4-7 ). Then use Wireless Networks tabs to
select network name, network type, and encryption keys.
Note that you can disable automatic wireless network configuration, and
revert back to using Atheros NCP configuration settings, by clearing the
“Use Windows to configure my wireless network settings” check box.