© Copyright by ATH-Heinl GmbH & Co. KG, 2017, All rights reserved / Misprint and technical changes reserved / Issue: 2017/10
- 13 -
MAINTENANCE
TO GUARANTEE A SAFE OPERTION OF THE MACHINE THE OPERATOR IS OBLIGED TO MAINTAIN THE
MACHINE REGULARLY.
ONLY AUTHORIZED SERVICE PARTNERS CAN MAKE REPARATION WORKS. THE CUSTOMER IS ONLY
ALLOWED TO MAKE THIS AFTER CONSULTING THE MANUFACTURER.
For maintenance and reparation works the machine must be disconnected from ALL
power supply (main switch off, mains plug disconnected). There must be made
precautions for a reconnection by accident.
Safety regulations for oil
ALWAYS CONSIDER THE LEGAL REGULATIONS RESPECTIVELY THE HANDLING OF USED OIL.
DISPOSE USED OIL ONLY THROUGH A CERTIFIED COPMANY.
IN CASE OF LEAKAGE THE OIL MUST BE COLLECTED IMMEDIATELY BY MEANS OF BINDER OR BASINS SO
THAT IT WON´T GET INTO THE GROUND EARTH.
AVOID ANY CONTACT OF THE OIL WITH THE SKIN.
MAKE SURE THAT NO OIL VAPOR ESCAPES IN THE ATMOSPHERE.
OIL IS INFLAMMABLE
–
PAY ATTENTION TO POSSIBLE SOURCES OF DANGER.
WEAR OIL RESISTANT PROTECTIVE CLOTHES AS E.G. GLOVES, PROTECTIVE GLASSES, PROTECTIVE
CLOTHES…
Maintenance instructions
The machine must be maintained and cleaned regularly, independent from the dirt.
Afterwards the machine must be treated with a cleaning agent (e.g. oil or wax spray). Do
not use cleaning agents which are harmful for the skin
IF THE NAMED POINTS WILL NOT BE FULFILLED, THEN THE WARRANTY CLAIM EXPIRES
Daily
-
Remove all liquids and other impurities from the jack immediately.
-
Damage to the surface protection (varnishing / zinc etc.) must be repaired.
-
Clean
Weekly
-
Check the tightness of all screws
-
Lubricate moving parts with grease
Monthly
-
Lubricate air valve (see maintenance and service manual)
-
Clean the air filter (see maintenance and service manual)
Annually
-
Change the hydraulic oil (see maintenance and service manual)
Summary of Contents for WH220
Page 1: ...USER S MANUAL ATH WH220...