IL-80 ATEX LED
USER
INSTRUCTIONS
Manufacturer: ATEXOR OY
P.O.Box 89, FIN-60101 SEINÄJOKI
Tel: +358-207 343 250
Internet: www.atexor.com
The Finnish MICA series rechargeable lamps are efficient and reliable tools.
To get the best benefit from your lamp, read these user instructions before using the product. Use of
the Mica product must be controlled and accepted by the operator. Personnel using the Mica product
must be authorised by the operator or a designated representative. The operator is responsible for
the correct use and maintenance of the product. Repair of the Mica product must be carried out by a
competent party that is authorised by the manufacturer.
CLASSIFICATION:
Make sure that the classification of the lamp matches the zone classification of the area before using
the lamp!
BEFORE USE:
The lamp must be charged before use. The battery of the lamp reaches its full capacity after
approximately ten recharge and discharge cycles. Recharging must be done using a compatible MICA
charger that must be installed outside the explosion hazard area. Recharge time from empty battery to
full is approximately 6 hours. We recommend storing the lamp in its charging holder at all times. Also
read the manual of the charger.
