Charging the tool
Safety instructions
Charge the tool before using it the first time. Connect the
charging cable to the USB-C port of the tool and to the
mains.
Charge the tool regularly, do not use if fully discharged.
If tool is used periodically, store the tool at 30-40% charge
level.
A battery charge indicator is displayed at the top of the
screen, when tool is switched on.
Battery replacement: to purchase a battery replacement,
please contact the point of purchase.
READ THESE SAFETY INSTRUCTIONS BEFORE USING THE DEVICE
IMPORTANT: Before first use, the user will be prompted to configure the regional
vehicle database and UHF RFID frequency settings according to the geographic
location where the tool will be operated. A proper configuration will prevent the
tool from emitting or receiving data on unauthorized radiofrequencies in violation of
local laws (example German fine regulations TKG §148 and §149).
It is under the sole responsibility of the user to declare the correct regional settings,
before operating the tool. The manufacturer cannot be considered liable for any non-
compliance with laws or regulations, due to the use of other settings.
WARNING:
This product emits electromagnetic and electronically
generated waves that may interfere with the safe operation of
pacemakers. Individuals with pacemakers should
NEVER USE
this product.
WARNING:
Do not use on live electrical circuits.
WARNING:
Users/bystanders must wear safety goggles.
WARNING:
Risk of entanglement.
- Use the device only in its normal operating positions and unplug it before
attempting to service or clean it.
- Keep your device and its enhancements (chargers, Lithium-polymer batteries, etc.)
out of the reach of small children as they may contain small parts.
- Only use the charger supplied with your device. Using another type of charger will
result in malfunction and/or danger.
Summary of Contents for VT66MB
Page 1: ...VT66MB quickstart guide...
