BH SENS DT41
– User Manual
UM-KJHU2-05-02
Page 35/41
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Your
TPMS TOOL
incorporates a low
battery detection circuit. Battery life is an
average of 300 sensor tests per battery
charge (approximately 60 to 80 vehicles)
this may change depending on the
sensor model.
Battery indicator status:
0%
25%
50%
75%
100%
When 0% is flashing, the tool will turn off after 10
seconds.
The battery is charging.
There is an issue with the battery -
please contact after sales service.
DO NOT
use the tool with low battery status because the transmission and emission may
not be reliable.
When charging, the battery light is red and
becomes green when the battery is fully charged.
When the battery is low, the “status bar” appears every 10 seconds. This display will stop
when the battery loses power.
Plug the USB cable between the tool and the power charger, and then plug the charger into
an appropriate outlet. The red LED "
CHARGE
" light will turn on.
Battery replacement
If the battery is defective, the tool must be returned to the after sales service for battery
replacement.
Opening the tool or tampering with the seal placed on the tool, if broken, will void the
warranty
USB Power
supply connector
