- 9 -
Installation
Single Stage Installation
In a Single Stage installation no additional Video Splitters are
daisy-chained down from the first unit. To set up a single stage
installation do the following:
1. Use a high density HDB-15 male/female video extender cable
(Part No. 2L-2401) to connect the PC's video port to the
Video In
port of the Video Splitter.
2. Use high density HDB-15 male/female video extender cables
(Part No. 2L-2401) to connect the
Video Out
ports of the
Video Splitter to the monitors.
3. Plug the power adapter into an AC source; plug the power
adapter cable into the Video Splitter's Power Jack.
4. Power up the Video Splitter; power up the monitors; power up
the PC.
1. Make sure that the power to all the devices you will
be connecting up has been turned off. You must
unplug the power cords of any computers that have
the
Keyboard Power On
function.
2. Make sure that all devices you will be connecting up
are properly grounded.