- 13 -
Source Device Selection
The VS0801 8-port Video Switch offers easy and flexible source
device selection with either the front panel pushbuttons, with the
remote control, or through the RS-232 serial interface.
Note:
Whenever the VS0801 is powered on, it automatically
selects the first port. You may choose one of the methods
outlined below to select a different port.
Manual Selection
To select a source device, press the pushbutton that corresponds
to the port it is connected to.
Note:
The SELECTED LED (green) light indicates which port is
currently selected.
Remote Control Selection
To select a source device with the remote control, press the
number button that corresponds to the port it is connected to.
Alternatively, you may also cycle through the source devices by
pushing the Port Up and Port Down buttons on the remote control
unit.
Use the Port Up button to select the next port in ascending
order (from left to right on the front view panel).
Use the Port Down button to select the next port in
descending order (from right to left on the front view panel).
Note:
Aim the remote control unit at the IR receiver located on
the front panel of the VS0801. For optimum performance,
make sure there is a clear line-of-sight between the
remote control unit and the IR receiver.