ATEN VS0201, User Manual, Page: 23 / 36

Chapter 3. Operation
15
Echo Command
If the Echo feature is enabled, each action from the front panel pushbuttons or
IR remote control sends a corresponding acknowledgement message to the
controller or management device connected to the RS-232 port.
The formula for the Echo command is as follows:
1. Echo C Control [Enter]
For example, to enable the Echo function, type the following:
echo on [enter]
The following tables show the possible values and formats for the Control
formulas:
The following table lists the available commands:
Command Description
echo Echo command
Control Description
on Enable Echo function
off Disable Echo function (default)
Command Control Enter Description
echo on [Enter] Echo function enabled
off [Enter] Echo function disabled