
VS0102 / VS0104 / VS0108 User Manual
14
EDID Mode Selection Commands
Extended Display Identification Data (EDID) is a data format that contains a
display's basic information and is used to communicate with the video source
system. You can set up which EDID mode the VS0102 / VS0104 / VS0108
uses with the commands that follow.
The formula for the EDID Mode Selection commands are as follows:
EDID C Control [Enter]
For example, to switch the EDID setting to auto, type the following:
edid auto [Enter]
The following tables show the possible values and formats for the
Control
command:
The following table shows the available EDID mode selection command list:
Command
Description
edid
Enable EDID selection
Control
Description
port1
Implement the EDID of the
connected display to Port 1, and
pass it to the video source
auto
Implements the true EDID remix
of all connected displays. The
VS0102 / VS0104 / VS0108
uses the best resolution for all
displays.
default
Implements ATEN’s default
EDID
Command
Control
Enter
Description
edid
port1
[Enter]
The EDID from Port 1 is passed to the
video source
edid
auto
[Enter]
The VS0102 / VS0104 / VS0108
implements the true EDID remix of all
connected displays and uses the best
resolution for all displays.
edid
default
[Enter]
ATEN’s default EDID is passed to the
video source