- 10 -
Cascading
To provide video display to additional monitors, the VS-0116
supports cascading up to 3 levels of video splitters.
Cascading additional Video Splitters involves the following six
steps. Refer to the installation diagram on the next page (the
numbers in the diagram correspond to the numbered steps) and
do the following:
1. Use a high density HDB-15 male/female VGA cable to con-
nect a video output port on the parent video splitter to the
video input port on the child VS-0116.
2. Use a male/male audio cable to connect an audio output port
on the parent video splitter to an audio input port on the child
VS-0116.
Note:
Repeat steps 1 and 2 for any additional video splitter(s)
you wish to cascade.
3. Connect a monitor to any available video output port on the
child VS-0116.
4. Connect speakers to the audio output port that corresponds
to the video output port you connected to in step 3.
Note:
Repeat steps 3 and 4 for any additional monitor(s) and
speakers that you wish to connect.
5. Plug the power adapter(s) that came with the VS-0116(s) into
an appropriate AC power source, then plug the power
adapter cable(s) into the Video Splitter’s power jack(s).
6. Power on the attached equipment.