ATEN VM51616H, User Manual

Page: 21 / 124

11
Chapter 3
Front Panel Configuration
Overview
The VM51616H can be configured and operated locally via the front panel
LCD/pushbuttons; remotely over a standard TCP/IP connection via graphical
user interface (GUI) using a web browser; via a remote terminal session using
Telnet; or by a RS-232 serial controller.
The local front panel operation is discussed in this chapter. Web GUI
Operation is discussed in Chapter 4, and RS-232 serial control is discussed in
Chapter 5.
Front Panel Pushbuttons
The front panel features an LCD display and pushbuttons for convenient
operation locally. This allows users to perform operations such as selecting
which source shows on which display, viewing the IP settings, configuring the
serial port, setting the EDID Mode / CEC / OSD /Output Status, setting the
Array Mode for the local display, selecting security settings, and loading/
saving profiles.
Note the following front panel pushbutton functions:
Š
Use the MENU pushbutton to access the Menu page options: IP Setting,
Serial Port Setting, Operation Mode, Security Mode, and Save to a Profile
(see
LCD Menu Organization , page 18).
Š
Use the PROFILE pushbutton to switch between the connection profiles
which have been added to the Profile List (see Profile List , page 39).
Pressing this pushbutton for longer than 3 seconds displays the Save to a
Profile page (see
Save to a Profile , page 31).
Š
Use the CANCEL pushbutton to go back to a previous page, return to the
Main Screen, stop or exit an operation.
Š
Use the ENTER pushbutton to select options and confirm operations.
Š
Use the ARRAY pushbutton to select a viewing mode and the input
sources for the local display (See Array Pushbutton , page 34).
Š
Use the AUDIO pushbutton to select an Input source for the stereo audio
output or mute it (see Audio Pushbutton , page 35).