Chapter 3. Operation
11
Power on/off individual Output displays
To power on/off individual Output displays, use the remote control to do the
following:
1. Press the OUTPUT port number (1–4) you want to power on/off.
2. Press the ON or OFF pushbutton within 2 seconds.*
3. Repeat steps 1-2 to change the power status back on/off.
*For individual power on/off to occur properly the ON or OFF
pushbutton must be pressed within 2 seconds of pressing the OUTPUT
number. Failing to do so will result in all displays being powered on or
off respectively.
Power on/off all Output displays
To power on/off all Output displays simultaneously*, use the remote control to
do the following:
1. Press the ON or OFF pushbutton.
2. Repeat step 1 to simultaneously change the power status of all Output
ports back on/off.
*Using the ON or OFF pushbutton brings all Output ports to the same
power status, regardless of current individual (on/off) power statuses.
