Control Box Gen. 2 Setup Guide
1
Overview
The Control Box Gen. 2 is an Ethernet-based controller device that connects
and integrates a spate of devices to provide single-access configuration and
convenient remote control for a room setting, such as boardrooms and lecture
halls.
It offers multiple bidirectional serial ports, relays, IR/serial ports, digital I/O,
and 12 V DC power output ports, as well as a dedicated control LAN port,
separate from the corporate LAN, for IP device management within a secure
subnetwork. In addition, it also supports a range of ATEN Expansion Boxes in
providing versatile scalability.
Once successfully connected, users will be able to configure all in-room
devices using the ATEN Configurator software — VK6000, and allow remote
control using ATEN Touch Panel, ATEN Keypads, and Android / iOS /
Windows mobile devices via the ATEN Control System app.
For a centralized management, the VK1200 / VK2200 can be connected to
ATEN Unizon, a global AV management platform software, allowing users to
control and monitor multiple ATEN Ethernet-based solutions across different
locations, including but not limited to ATEN Control Boxes, at the same time.
Package Contents
Make sure the following are present and in working condition:
1 Control Box Gen. 2
1 power
cord
1 foot pad set (4 pcs)
1 rack mount kit (VK2100A / VK2200 only)
1 user instructions
1 terminal block kit
Terminal Block
VK1100A / VK1200
VK2100A
VK2200
2-Pin
7
12
20
3-Pin
2
4
6
5-Pin
1
3
4
