Chapter 2. Hardware Setup
14
1. Connect your source device to the VE883T. To transmit HDMI video/stereo
audio/USB/serial/Ethernet signals, connect the source device’s HDMI Out/
Audio Out/USB/RS-232 Serial/Ethernet port to the VE883T.
2. Plug the SFP+ Modules to the Optical Ports on your VE883T and VE883R,
and then connect the two SFP+ modules using a duplex fiber optic cable.
3. Use an HDMI cable to connect your video display to the HDMI Out port on
the VE883R.
4. Plug the Power Adapter cable into the Power Jack on the VE883T and
VE883R.
5. (Optional) Connect a barcode scanner or a touch pad to the RS-232 Port
on the VE883R using a serial cable.
6. (Optional) To provide Internet or LAN connectivity to the source device (e.g.
PC), connect the VE883R to the Internet or LAN using a Cat 5e/6/6a cable.
7. (Optional) Connect a USB peripheral to the USB Type-A port.
Note:
The VE883 supports up to 3 USB flash disks or 4 USB peripherals of
other type via a USB hub.
8. (Optional) Connect the unit to an audio speaker.
9. (Optional) Connect an IR Emitter to the IR Port on VE883T or VE883R,
depending on where you wish to use the IR remote control unit; install the
IR receiver to the corresponding VE883T/VE883R.
10. Power on the VE883T, VE883R, and the connected devices.