Chapter 2. Hardware Setup
8
Connecting the VE2812R Unit
Follow the steps below to connect the VE2812R to an HDMI-enabled display
source, a compatible ATEN Video Transmitter, and other controls as required.
1. Connect an HDMI-enabled display to the VE2812R’s HDMI Out Port.
2. Follow the steps below to set up your audio output.
a) To use an independent speaker, connect the speaker to the VE2812R’s
Audio Out Port (Coaxial or Stereo) using an appropriate audio cable.
b)
Depending on the interface of your chosen audio output device, adjust
the audio signal using the Audio Channel Switch.
Note:
Stereo audio will be mute if the channel is set to
CH5.1
.
Audio
Interface
Audio Channel
Switch
Description
Stereo
2 ch
Sets the audio output to channel 2.
Coaxial
5.1 ch
Sets the audio output to channel 5.1.
HDMI
Auto
Detects the supported audio channel of the connected
HDMI display.
VE2812T
)
recommended
*!
PC
Power
6
4
8
2
5
3
Audio Speaker
HDMI Display
IR Receiver
or
0
ATEN Control Box
!!
Control Pad
5
IR Emitter
7