ATEN VE2812EUT, User Manual

Page: 16 / 38

VE2812UST / VE2812EUT User Manual
6
LED Display
You can find the unit’s LEDs on the top and front panel as illustrated below. See
the table below for details on LED indication.
No. LED Indication Description
1 Link LED Lights orange The transmission to the receiver is stable.
Blinks orange The transmission to the receiver is unstable.
2 Power LED Lights green The unit is receiving power.
3 HDMI Mode LED Lights orange The unit is set to transmit HDMI input.
4 Auto Switch
Mode LED Lights orange The unit is in the Auto Switch mode. For
details, see Selecting the Input Mode ,
page 15.
5 VGA Mode LED Lights orange The unit is set to transmit VGA input.
Note:
Š
The Power and Link LED blink at the same time to indicate that the
firmware upgrade is in progress.
Š
Auto Switch Mode LED, HDMI Mode LED, and VGA Mode LED light and
blink at the same time to indicate that the RS-232 mode is changed.