ATEN VE2812EUT, User Manual

Page: 25 / 38

15
Chapter 3
Operation
Selecting the Input Mode
Input Modes
You can switch among different input modes based on your needs. Refer to the
table below for how each mode works.
Input Mode Description
Auto Switch
(LED lights orange)
The VE2812UST / VE2812EUT:
Š
automatically transmits the first detected input to
the connected receiver.
Š
prioritizes HDMI transmission if both HDMI and
VGA inputs are plugged in at the same time.
Š
automatically switches to a newly detected input to
the connected receiver.*
Note: You can disable this part of the Auto Switch
mode (automatic input switching) using an RS-232
command. For more details, see
RS-232 Commands ,
page 17.
HDMI
(LED lights orange)
The VE2812UST / VE2812EUT only transmits HDMI
source to the connected receiver.
VGA
(LED lights orange)
The VE2812UST / VE2812EUT only transmits VGA
source and its audio input to the connected receiver.