ATEN VE157, User Manual

Page: 19 / 49

Hardware Setup
11
Hardware Installation
After mounting the VE157 / VE607 / VE807 Transmitter and Receiver units,
you can conveniently connect the VE157 / VE607 / VE807 wall plate covers
to your input/output equipment. Refer to the installation diagram on the
following page (the numbers in the diagrams correspond to the steps below),
and do the following:
1. Connect the Video IN Port on the VE157T / VE607T / VE807T
(Transmitter) to the Video OUT port on your video source device.
2. Connect one end of the audio cable to the Audio IN port of the VE157T /
VE607T / VE807T and connect the other end to the Audio OUT port of
the source device.
3. Connect the Video OUT port on the VE157R / VE607R / VE807R
(Receiver) to the Video IN port on your video display device using the
VGA/DVI/HDMI cable that came with your display device.
4. Connect your speakers to the Audio OUT port on the VE157R / VE607R /
VE807R.
5. Connect the Transmitter or Receiver to a power outlet using the provided
terminal block connector / power adapter – see How to Supply Power ,
page 8.
6. Connect one end of the Cat 5e cable to the Line OUT port (VE157T) /
TMDS port (VE607T / VE807T) on the Transmitter unit. Connect the
other end of the Cat 5e cable to the Line IN port (VE157R) / TMDS port
(VE607R / VE807R) on the Receiver unit.
7. (Optional) Use a second Cat 5e cable to connect the Power ports (VE156T
/ VE156R) / DDC ports (VE607T / VE607R / VE807T / VE807R).
Note: 1. A second Cat 5e cable connection is required only if you need to
transmit power to either Transmitter or Receiver.
2. For VE607 / VE807, in addition to the above, a second Cat 5e
cable is only required if you need to use real EDID Bypass and
HDCP key authentication.
8. Power on your source and display devices.